中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 43143-2023 无损检测 声发射检测 混凝土结构活动裂缝分类的检测方法(中英文版) Nondestructive testing Acoustic emission testing Detection method for classification of active cracks in concrete structures |
|||
GB/T 6616-2023 半导体晶片电阻率及半导体薄膜薄层电阻的测试 非接触涡流法(中英文版) Testing of semiconductor wafer resistivity and semiconductor film sheet resistance non-contact eddy current method |
|||
YY/T 1907-2023 人工智能医疗器械 冠状动脉CT影像处理软件 算法性能测试方法(中英文版) Artificial Intelligence Medical Devices Coronary CT Image Processing Software Algorithm Performance Testing Methods |
|||
YD/T 4374-2023 软件定义同步网测试方法(中英文版) Software-defined synchronization network testing method |
|||
GB/T 43493.3-2023 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第3部分:缺陷的光致发光检测方法(中英文版) Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 3: Photoluminescence detection method of defects |
|||
GB/T 43418-2023 亚麻纤维组成成分的检测方法(中英文版) Method for testing the composition of flax fiber |
|||
GB/T 43256-2023 分布式光纤应变测试系统参数测试方法(中英文版) Parameter testing method of distributed optical fiber strain testing system |
|||
GB/T 4893.4-2023 家具表面漆膜理化性能试验 第4部分:附着力交叉切割测定法(中英文版) Testing of physical and chemical properties of paint films on furniture surfaces Part 4: Adhesion cross-cut determination method |
|||
JC/T 2708-2022 真空玻璃传热系数检测方法(中英文版) Testing method for heat transfer coefficient of vacuum glass |
|||
YY/T 1858-2022 人工智能医疗器械 肺部影像辅助分析软件 算法性能测试方法(中英文版) Artificial intelligence medical equipment, lung image auxiliary analysis software, algorithm performance testing method |
|||
GB/T 13217.3-2022 油墨细度检验方法(中英文版) Testing method of ink fineness |
|||
GB/T 40200-2021 工业有机废气净化装置性能测定方法(中英文版) Method of testing the performance of equipment for industrial organic waste gas purification |
|||
GB/T 5095.2303-2021 电子设备用机电元件 基本试验规程及测量方法 第23-3部分:屏蔽和滤波试验 试验23c:连接器和附件的屏蔽效果 线注入法(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c:Shielding effectiveness of connectors and accessories—Line injection method |
|||
GB/T 5095.2307-2021 电子设备用机电元件 基本试验规程及测量方法 第23-7部分:屏蔽和滤波试验 试验23g:连接器的有效转移阻抗(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-7: Screening and filtering tests—Test 23g: Effective transfer impedance of connectors |
|||
GB/T 39938-2021 室内电取暖 地暖 性能特征 定义、测试方法、尺寸和公式符号(中英文版) Electric room heating—Underfloor heating—Performance characteristics—Definitions, method of testing, sizing and formula symbols |
|||
YD/T 3842-2021 软件定义分组传送网测试方法(中英文版) Software Defined Packet Transport Network Testing Method |
|||
GB/T 41105.2-2021 无损检测? X射线管电压的测量和评价 第2部分:厚板滤波法稳定性核查(中英文版) Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 2: Constancy check by the thick filter method |
|||
RB/T 063-2021 检验检测机构管理和技术能力评价 方法的验证和确认要求(中英文版) Verification and validation requirements for the management and technical capability evaluation methods of inspection and testing institutions{译} |
|||
GB/T 5169.20-2021 电工电子产品着火危险试验 第20部分:火焰表面蔓延 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods |
|||
GB/T 10573-2020 有色金属细丝拉伸试验方法(中英文版) Tensile testing method for fine wire of nonferrous metals |
找到:148條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 8 |